Crossprobe

KiCad design review checklist: schematic and PCB

ERC and DRC tell you when a rule is broken. They don't tell you that the reset pin floats, that the regulator has no output capacitor, or that half of your I²C bus is labelled SDA and the other half SDA1. This checklist covers what an experienced reviewer looks at in a KiCad project before the boards are ordered.

1. Before the review

2. Power and regulators

3. Decoupling and bulk capacitance

4. Pins, pull-ups and interfaces

5. Net naming and connectivity

6. Parts, values and footprints

7. PCB layout and routing

8. ERC, DRC and parity

9. Fabrication outputs

Have your assistant work through this list

Crossprobe's MCP server gives Claude, Cursor and other assistants your KiCad project's parts, nets and routing, and the ERC, clearance and parity results. Ask for a design review, and each issue comes back with the parts and nets involved. The local server reads the project on your disk, writes nothing and needs no account.

Set up the local server