# Keyboard shortcuts

Crossprobe follows KiCad's mouse and keyboard where it can, so KiCad users feel at home. The one deliberate difference is a view mode next to the edit mode, where clicks only select and inspect. <kbd>E</kbd> switches between them.

On macOS, <kbd>⌘</kbd> is the command key; elsewhere use <kbd>Ctrl</kbd>.

## Everywhere

| Keys | Action |
|---|---|
| <kbd>S</kbd> <kbd>B</kbd> <kbd>3</kbd> | Schematic, board, 3D |
| <kbd>F</kbd> | Fit the view (on the board in edit mode, <kbd>Home</kbd>) |
| <kbd>/</kbd> | Search parts and nets |
| <kbd>Esc</kbd> | Clear the selection |
| <kbd>E</kbd> | Edit mode on or off |
| <kbd>⌘Z</kbd> <kbd>⇧⌘Z</kbd> | Undo, redo |
| <kbd>⌘S</kbd> | Save |

## Schematic editing

| Keys | Action |
|---|---|
| <kbd>W</kbd> | Wire |
| <kbd>L</kbd> | Label |
| <kbd>J</kbd> | Junction |
| <kbd>Q</kbd> | No-connect flag |
| <kbd>A</kbd> | Add a part |
| <kbd>R</kbd> | Rotate |
| <kbd>X</kbd> <kbd>Y</kbd> | Mirror |
| <kbd>Del</kbd> | Delete |
| <kbd>⌘C</kbd> <kbd>⌘V</kbd> <kbd>⌘D</kbd> | Copy, paste, duplicate |

## PCB editing

**Selecting.** A pad selects that pad, a part's body the part, and copper its net. <kbd>Alt</kbd>+click lists everything under the cursor to choose from, Shift-drag box-selects, and <kbd>U</kbd> takes the whole trace. Right-click opens a menu for what's under the cursor.

| Keys | Action |
|---|---|
| <kbd>R</kbd> | Rotate |
| <kbd>F</kbd> | Flip to the other side |
| <kbd>L</kbd> | Lock (locked items don't move, rotate, flip or delete) |
| <kbd>Del</kbd> | Delete |
| Arrows | Nudge |
| <kbd>⌘C</kbd> <kbd>⌘V</kbd> <kbd>⌘D</kbd> | Copy, paste, duplicate (copies get fresh UUIDs and the next free reference) |
| <kbd>X</kbd> | Route |
| <kbd>6</kbd> | Route a differential pair |
| <kbd>V</kbd> | Via |
| <kbd>A</kbd> | Add a footprint |
| <kbd>T</kbd> | Find a footprint |
| <kbd>⌃⇧M</kbd> | Measure (snaps to pads) |
| <kbd>B</kbd> | Refill zones |
| <kbd>F8</kbd> | Update PCB from schematic |
| <kbd>N</kbd> <kbd>⇧N</kbd> | Next, previous grid |
| <kbd>PgUp</kbd> <kbd>PgDn</kbd> | Front or back copper |
| <kbd>Home</kbd> | Fit the board |

## While routing

| Keys | Action |
|---|---|
| <kbd>W</kbd> <kbd>⇧W</kbd> | Wider, narrower track |
| <kbd>M</kbd> | Router mode: walkaround, shove, straight |
| <kbd>/</kbd> | Switch the 45° posture |
| <kbd>V</kbd> or <kbd>PgUp</kbd> <kbd>PgDn</kbd> | Change layer through a via |
| <kbd>Esc</kbd> | Finish the track |
